Photo: Anil Sharma / PexelsSan Antonio construction services
Concrete flatwork, access, and site repairs.
Commercial slabs, pads, curbs, ramps, walkways, demolition, and replacement work in the San Antonio area.
Typical work
The service
Scope before slogans.
Concrete performance starts below the slab. Crownwood scopes the use, loads, drainage, reinforcement, access, and existing base before pricing new work or replacement. The result is a buildable scope rather than a generic price per square foot.
Typical scope
Work Crownwood can price and plan.
Commercial flatwork
Slabs, walkways, approaches, equipment areas, and paved work surfaces.
Loading and dumpster pads
Concrete areas planned around vehicle paths, wheel loads, container service, and drainage.
Curbs and gutters
New or replacement curb sections, drainage edges, islands, and pavement transitions.
Accessible routes and ramps
Site work coordinated with the project plan, current standards, field elevations, and the authority having jurisdiction.
Demolition and replacement
Sawcutting, removal, base correction, forming, reinforcement, placement, and joint planning.
Concrete repair
Targeted replacement of failed panels and transitions where the surrounding work can remain.
How the work is scoped
A straightforward four-step process.
Measure and document
Confirm limits, elevations, drainage, access, loading, and adjoining surfaces.
Define the section
Coordinate thickness, reinforcement, joints, base preparation, concrete requirements, and finish with the project needs.
Remove and form
Complete demolition where required, correct the base, set forms and reinforcement, and prepare transitions.
Place and protect
Place, finish, joint, cure, and protect the work until it is ready for its intended use.
For a useful quote
Send the information that changes the scope.
- Plans, dimensions, or approximate square footage
- Intended vehicle or equipment loads
- Required slopes, drains, and tie-in elevations
- Access, demolition, and haul-off constraints
- Finish, joint, and schedule requirements
Common questions
Can you replace only the failed concrete?+
In many cases. Replacement limits should follow sound concrete, practical sawcut lines, joint layout, base condition, and the way the area is loaded.
How long before concrete can be used?+
That depends on the mix, weather, thickness, curing approach, and intended load. The project plan should define when foot traffic, light vehicles, and heavy service can return.
Do ramps automatically meet accessibility requirements?+
No contractor should make that assumption without measurements and the applicable design criteria. Slopes, cross-slopes, landings, transitions, markings, and site constraints all matter.
What should I send for a quote?+
Send the site, dimensions or plans, photos, intended use and loads, drainage information, finish requirements, and desired schedule.
Related services
Project inquiry
Request a commercial concrete quote.
Share the site, scope, quantities, operating constraints, and target schedule. Photos and plans help.